0
View All Products
View All Products

Support › TIMEBASE II (iBTW22)

TIMEBASE II (iBTW22)

Do you own this product?

Add the TIMEBASE II (iBTW22) to your account to receive email notifications about software/firmware updates and more.

FAQ's

Discover answers to some of the most common questions about your iHome product.

    • What’s the warranty period for this product?

      permalink

      Limited 1 Year Warranty: iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase.

    • How to change the clock display to 12hr. mode or 24hr. mode (military time)?

      permalink

      At any point during time set, press the “Alarm button" to toggle the clock display between 12hr. mode and 24hr. mode (military time).

    • Where can I buy a replacement CR2450 Clock Backup Battery?

      permalink

      Battery CR2450 is standard 3.0 V Lithium Battery (620 MAh) and it can be purchase from our website or from most electronic store.

    • Should I disconnect the unit if I am going on vacation?

      permalink

      If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage from power outage.

    • How to Set the Clock?

      permalink

      1. Press and hold the (Time Set) Button located on back of the unit for 2 seconds until the clock display flashes and a beep sounds.

      2. To switch the clock display between standard 12 hour time and 24 hour (“military”) time display, press the (Alarm 1 or 2) Button while the display is flashing during clock setting.

      3. Press the (+ or -) Buttons to adjust the clock to the current time. Make sure you set the correct AM/PM time. “P” for PM indicator appears to the left of the display; there is no AM indicator.

      4. Press the (Time Set) Button to confirm the time. The YEAR will flash on the display.

      5. Press the (+ or -) Buttons to adjust to the current YEAR.

      6. Press the (Time Set) Button to confirm the YEAR. The MONTH will flash on the display.

      7. Press the (+ or -) Buttons to adjust to the current MONTH.

      8. Press the (Time Set) Button to confirm the MONTH. The DAY will flash on the display.

      9. Press the (+ or -) Buttons to adjust to the current DAY.

      10. Press the (Time Set) Button to confirm the DAY and exit clock settings. 2 beeps will confirm clock setting is complete.

    • How do I reset the Bluetooth Setting on the iHome unit.

      permalink

      • Make sure the power is turned on.
      • Press and hold the Bluetooth button for 10 seconds until you hear a distinct beep. This will reset and clear all the Bluetooth setting on the iHome unit.

    • What is the Bluetooth wireless range for audio streaming?

      permalink

      The Bluetooth wireless range is approximately 33 feet.

Still Have Questions?

Contact customer service about TIMEBASE II (iBTW22)